- Remove glass of a forward door (Removal and installation of door glasses see).
- On models with электроприводными стеклоподъемниками disconnect a negative wire from the battery and electroconducting from приводного the regulator motor, disunite a contact socket of door electroconducting (see an illustration of the Detail of installation of a regulator стеклоподъемника a forward door).
|
- Drill rivets of fastening of a regulator стеклоподъемника to the internal panel of a door and take it through the bottom aperture, - pay attention that the bottom part of a regulator is laid in a groove (see an illustration of the Detail of installation of a regulator стеклоподъемника a forward door).
|
|
- Installation is made upside-down, - for regulator fastening use new rivets. On models with programmed стеклоподъемниками make installation of the closed position of glass on the management block for what sit down on a driver's seat and close all doors, include ignition and приопустите glasses, then again lift glasses and keep the button of management pressed during even at least two seconds.
|
|
|